Description
The ideal hot water pressure washer for faster cleaning & sanitisation
The V-TUF RAPID VTS2115HPC HIGH FLOW stainless steel built pressure washer has been developed by the user to satisfy the requirements for the ideal hot pressure washer for removal of bulky or heavy dirt. The RAPID VTS 21150HPC’s 100% 304 STAINLESS STEEL CONSTRUCTION (chassis, cover, water tank and boiler housing) makes it one of the toughest and corrosive resistant machines. The VTUF RAPID VTS 21150HPC has a high pressure chemical feature to give the detergent deep penetration in to dirt and grease. Hot water cleaning combined with high water flow makes tough cleaning tasks light work!
Commercial pressure washers require a tough, easy running pump. The RAPID VTS2115HPC features the proven V-TUF XHDM450SS low revving European pump, 200 bar rated with a heavy duty crankshaft design including hard wearing ceramic plungers and a brass pump head. Servicing is straight forward and spares availability is excellent. The XHDM450SS pump is lubricated with top specification V-TUF PRESSURE LUBE (PL500) which contains MSM, virtually eliminating friction and wear. The pump lube level is also visible from outside the machine.
The simple but robust stainless steel control panel is easy to operate and maintain with clear visible warning lights. The control circuit is a safe 24 volt low tension electrical control with IP56 electric protection, while the V-TUF DPS (Digital Protection System) means:
- Delayed Auto stop (30 second delay stop motor with immediate start) – reduces wear on motor and pump
- The machine will shut down after 1 hour is not used – safety and reduced fire risk
- Low Water Cut-Out – reducing expensive damage from water shortage.
- The machine will stop if the motor over heats
- Water leak detection shut off – reducing unnecessary wear and expense
- Low Fuel Cut Out – to prevent damage to the fuel system
- Complete machine safety shut down if the unit is not used for an hour
Features
- Quieter running – Sound Level – Sound Level : up to 10% less than some of its competitors
- Tough, easy running pump – heavy duty crankshaft design with hard wearing ceramic plungers and brass pump head
- Pressure can be regulated and the regulation wheel is direct on the pump and easy to reach
- High efficiency double pass heat exchanger with 3 second purge time offers you hotter water while using less fuel and clean combustion
- Simple, robust stainless steel control panel is easy to operate and maintain with clear visible warning lights
- Safety pressure valve : visible and direct on the pump (following all European regulations)
- 4 x large robust wheels – ideal for rough terrain
- Quick release KTQ 350 bar Optigun lance system with 10m of hose and Opti-spare ® 10m KWIK-SWIVEL coupling system
- Chemical injection system with Micro-Controllable Detergent flow regulator
- Low Rev Motor With Thermal Protection
- 100% 304 Stainless Steel Chassis – with crane attachment points
- 100% 304 Stainless Steel Protective Cover
- Large 24ltr easy fill, removable fuel tank
- Large High efficiency double pass heat exchanger
- Burner control with flow switch and thermostat
- 24v low tension control system
Reviews
There are no reviews yet.