Stihl MS182 CBE Chainsaw 16″

Description

STIHL MS 182 C-BE Petrol Chainsaw – A Homeowner’s Best Friend

If you’re looking for a chainsaw that’s powerful, easy to handle, and built to make everyday tasks simpler, the STIHL MS 182 C-BE petrol chainsaw is the perfect choice. Whether you’re cutting firewood, pruning branches, or felling small trees, this tool has the strength and reliability to get the job done with ease.

Why You’ll Love It

• Strong yet efficient: Powered by a STIHL 2-MIX engine, it delivers impressive cutting performance while keeping fuel use low.
• Built for tough jobs: Comes with metal bumper spikes and a 3/8″ P saw chain, available with a 14” or 16” guide bar.
• Quick Chain Tensioning: Makes adjusting your chain simple and stress-free.
• Comfortable to use: The STIHL anti-vibration system helps reduce strain on your muscles and joints.
• Easy starts, every time: With single-lever operation, ErgoStart technology, and a handy combi-lever, restarting is smooth and reliable.
• Smart design: Transparent fuel and oil tanks let you know when it’s time to refill, while the primer bulb reduces the number of pulls needed to start.

Extra Peace of Mind

Extend your domestic warranty from 2 to 3 years when you purchase 5 litres of STIHL MotoMix® fuel alongside your chainsaw. We  will handle the warranty registration for you.

Helpful Extras

Finding the right replacement guide bar or saw chain is easy, with these parts also available on our website.

(Please note: exterior design of STIHL guide bars may change, but technical specifications remain the same.)

Specification

Stihl Quick Chain Tensioning

RE-TENSION THE SAW CHAIN TOOL-FREE. Thanks to STIHL Quick Chain Tensioning, you can tension your saw chain quickly and without tools, thanks to the adjusting wheel. Turning the adjusting wheel to the left releases tension on the saw chain, and turning the adjustment wheel to the right tensions the saw chain. The guide bar will be automatically secured when you tighten the sprocket cover.

Stihl ErgoStart

EFFORTLESS STARTING. STIHL ErgoStart saves you energy when starting your power tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An additional spring between the crankshaft and the starter cord roll makes this easier.

Side Mounted Chain Tensioning

FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.

Manual Fuel Pump

FOR FEWER STARTING STROKES. The manual fuel pump reduces the number of strokes required to start the power tool, making the start-up process quicker and easier This is particularly helpful after longer breaks in operation. To use it, actuate the pump several times before starting. This will ensure that there is enough petrol in the system when starting.

Compensator

REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.

Tool-Free Cap for Oil and Fuel Tanks

QUICK AND EASY TO USE. With tool-free fuel cap, you can open and close oil and fuel tanks in just a few simple steps, thanks to a bayonet closure.

Transparent Oil Tank

QUICK AND EASY TO USE. With tool-free fuel cap, you can open and close oil and fuel tanks in just a few simple steps, thanks to a bayonet closure.

Advanced Combustion Technology

QUICK AND EASY TO USE. With tool-free fuel cap, you can open and close oil and fuel tanks in just a few simple steps, thanks to a bayonet closure.

Combi Lever with Stop Function

SIMPLIFIED OPERATION. Only one start position is required on the combi lever. Thanks to the stop function, once the machine is turned off the control lever immediately moves back into the operating position. This allows a warm machine to be restarted immediately.

Stihl 2-Mix Engine

HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.

Stihl Anti-Vibration System

FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.