Description

Oregon 21BPX Chain 0.325in Micro Chisel Low Kickback 1.5mm 50 Link

Lightweight smooth fast cutting chain for professionals who use .325″- pitch chainsaws.Recommended for saws of 38cc to 58cc and bars from 11″ to 20″ (28 to 50cm).

* Micro-Chisel cutters have small radius working corners that cut fast and are easy to sharpen
* Bumper drive links reduce kickback
* Vibe-Ban chassis design reduces vibration 25% or more at the handles
* Lubrilink tie straps help oil where it is needed, on the chain
* Lubriwell oil holes in all drive links help carry oil around the full lenght of the guide bar’s groove
* Top plate witness mark makes sharpening easier

CHECK THE MEASUREMENTS BELOW PITCH= .325″
GAUGE= 1.5mm (0.058)
LINKS= Your Choice

OK SO WHAT DOES THAT MEAN……? Pitch- the distance between any 3 of the rivets on the chain then divided by 2 Gauge- the measurement between the rails of your guide bar Links- the number of each links on your chain that sit into the guide bar